Vent Axia Solo Plus Humidistat and Timer Fan

Vent Axia Solo Plus Humidistat and Timer Fan

• Filterless as standard - innovative impeller design means no need for a filter 
• Humidistat + Timer function
• Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets 
• IPX4 rated 
• Flush or surface mountable 
• Adjustable rear or side exit spigot 
• Extremely low sound levels 
• Suitable for wall, ceiling and panel mounting 

The Solo Plus range is suitable for internal bathrooms, toilets and other small rooms. The Solo Plus can be flush or surface mounted, with a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot can also be adjusted for side ways exhaust enabling recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller allows for installations with longer duct runs using 100mm ducting, whilst still achieving 15 l/s as required by Document F of the current Building Regulations. The Solo Plus is classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F for wet rooms. The Solo Plus has a choice of two boost/override motor speeds set at installation, medium (17l/s) or high (22l/s), with an optional constant trickle speed (9l/s), also selectable at installation except in the P model. Depending on the model, the fan will switch from trickle (if selected) to boost (medium or high) via the pullcord/ light switch/humidity sensor/PIR. All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or flat ducting.